Product industry application introduction

Application of Micron Sodium Chloride

Fengzhihu Salt Research Laboratory Technology (Jiangsu) Co., Ltd. is a professional and large-scale salt research technology enterprise integrating scientific research, production and sales. Talents prosper the enterprise and create a brand. The company currently has more than 20 employees, including 7 doctoral research and development teams, including 1 doctor and 2 senior engineers. The micron-sized sodium chloride developed and produced by the company is widely used in photoresist semiconductors, medicine, precision machinery, coatings, cosmetics, fire protection, rubber and plastics, precision electronic components, new building materials and other fields. The specific application is as follows:

1. Cosmetics industry:

Cosmetics refer to products that are applied to the human body by smearing, spraying, sprinkling or other similar methods to achieve the purpose of cleaning, maintaining, beautifying, modifying, and changing the appearance to maintain a good state. Mainly divided into personal care and home care. Personal care mainly includes toner, barrier cream, essence milk, toothpaste, shampoo, bath products, facial cleansing, etc.; home care mainly includes laundry detergent, dish soap, toilet cleaner, oil stain cleaner and other categories.
The cosmetics industry mainly uses 300 micron powder salt and 300 micron bath salt granular salt, and some companies with higher quality requirements use 100 micron and 150 micron.

1) As a thickener in household cleaning products, it has faster dissolution speed, no impurities, and stable
Advantages of better qualitative
2)As an osmotic pressure regulator in the essence and water cream series, it can make the product more transdermally absorbed and keep
The antibacterial, antipruritic and anti-inflammatory effects of sodium chloride
3) Replace the original scrub particles in the bath salt scrub, and fully demonstrate the effect of salt in the cleaning process
(Sterilization, anti-inflammatory, anti-itch)
4)Transparent soap products, the purity of micron sodium chloride is higher

2. Coating industry:

Paint, traditionally called paint in China. The so-called paint is coated on the surface of the object to be protected or decorated, and can form a continuous film firmly attached to the object to be coated, usually based on resin, oil, or emulsion, with or without adding pigments, fillers, adding The corresponding additives are viscous liquids prepared with organic solvents or water. According to the form of the product, it can be divided into: liquid coating, powder coating, high solid content coating
The coating additive industry mainly uses 100 microns and 300 microns, which can improve the color brightness in automotive paints and make the paint surface more plastic. Customer example: Jiangxi Wani Chemical


3. Plastic industry:

Plastic is a high molecular compound polymerized by addition polymerization or polycondensation reaction with monomer as raw material. It has medium resistance to deformation and is between fiber and rubber. Agents, colorants and other additives. The main component of plastic is resin. Resin refers to a polymer compound that has not been mixed with various additives. The term resin was originally named after the lipids secreted by animals and plants, such as rosin and shellac. Resin accounts for about 40% to 100% of the total weight of plastic. The basic properties of plastics are mainly determined by the nature of the resin, but additives also play an important role. Some plastics are basically composed of synthetic resins with no or few additives, such as plexiglass.
The plastic industry currently uses 150-micron, 100-micron, 50-micron, and 20-micron-grade sodium chloride. The main uses are:
1)Plastic filling, used as a filler in line pipes or other materials that do not contact water, has better properties than fillers such as calcium carbonate
It has the characteristics of better light transmission and more stable color
2)Plastic holes, in the process of making special plastic sheets and injection molded parts, fill them with micron sodium chloride and then use water
Wash off to create pores

4. Semiconductor photoresist industry:

Photoresist, also known as photoresist, refers to a resist-etched film material whose solubility changes through irradiation or radiation of ultraviolet light, electron beams, ion beams, X-rays, etc. It is a light-sensitive mixed liquid composed of three main components: photosensitive resin, sensitizer and solvent. It is used as an anti-corrosion coating material during photolithography process. When the semiconductor material is processed on the surface, if an appropriate selective photoresist is used, the desired image can be obtained on the surface. Photoresists are classified into two categories, positive and negative, according to the images they form. In the photoresist process, after the coating is exposed and developed, the exposed part is dissolved, and the unexposed part remains. The coating material is positive photoresist
The application specification of 5 microns and below is used as the front-end abrasive of the color paste, which can greatly improve the precision of the color paste, and effectively improve the technical barrier breakthrough of my country’s chip semiconductor industry.

5. Feed industry:


Feed is the general term for the food of animals raised by all people. In a narrower sense, general feed mainly refers to the food of animals raised in agriculture or animal husbandry. The feed includes soybean, soybean meal, corn, fish meal, amino acid, miscellaneous meal, whey powder, oil, meat and bone meal, grain, feed additives and more than ten varieties of feed raw materials
1) As the raw material of the front-end product of the feed additive, the specific function is unknown. Application case: Wu Bentai Biology
2)The veterinary drug industry can also be used as a release agent for veterinary drug tablets
The feed industry mainly uses micron sodium chloride with specifications of 150 microns and below

6.Precision instrument casting industry:

Precision casting refers to the general term for the process of obtaining precise size castings. Compared with the traditional sand casting process, the size of the castings obtained by precision casting is more accurate and the surface finish is better. It includes: investment casting, ceramic casting, metal casting, pressure casting, lost foam casting.
1)Using the high melting point of salt, it is used in the forging process of some specific materials
2) Salt water welding as a precious metal thermocouple
The main application is 150 micron and 100 micron sodium chloride

7. Porous materials:
Porous materials refer to materials with a large number of pore structures of a certain size and a relatively high specific surface area. Porous materials research work is very active. No matter the innovation and improvement of preparation methods, or the research and utilization of physical properties, great progress has been made. With the deepening and improvement of preparation method research, the application range of porous materials will be wider, and it will become a new material with great application potential in the future.Applied in 150 micron, 100 micron, 50 micron and other specifications, used in the manufacture of porous aluminum, the principle is the same as plastic pore making

8. Flexible electronic materials:

Flexible electronics is a general term for a technology, and it is an emerging electronic technology that fabricates organic/inorganic material electronic devices on flexible/ductile substrates. Compared with traditional electronics, flexible electronics has greater flexibility, can adapt to different working environments to a certain extent, and meet the deformation requirements of equipment.It is used as a silica gel hole to provide shock absorption for electronic components, mainly using 100 micron sodium chloride


9. New building materials:

New building materials are a new generation of building materials based on traditional building materials. New building materials mainly include new building structure materials, new wall materials, thermal insulation materials, waterproof sealing materials and decoration materials.
Mainly used in exterior wall concrete mortar, beautifying agent and putty that are not in contact with steel bars, and mainly used in 150 micron and 100 micron sodium chloride

10. Artificial rainfall:

As artificial rainfall condensation nuclei, 100 micron sodium chloride is mainly used

11. Instant snack food:

Low-sodium spraying, under the same saltiness, the human intake of micron-level sodium chloride is less, achieving the effect of low-sodium health preservation, mainly using sodium chloride below 50 micron level

12. 3D printing:

Apply 150 micron specification, as the carrier fulcrum, need to be cleaned after molding

13. Firefighting:

Metal fire extinguisher field

发表评论

您的电子邮箱地址不会被公开。 必填项已用 * 标注

Let's stay in touch